Harvest Right Freeze Dryer Replacement Door Seal – Large

Description

Harvest Right freeze dryer replacement door seal for the Harvest Right Pro large freeze dryer.

How Do I Replace the Door Gasket on My Freeze Dryer?

Replacing the door gasket on your Harvest Right freeze dryer is a straightforward process. Follow the steps below to ensure a proper seal and optimal performance.

Tools Needed:

None required

Steps to Replace the Door Gasket:

1. Remove the Old Gasket:
   • Open the door of your freeze dryer.
   • Gently pull the old gasket away from the door. It should come off easily as it is not glued or fastened.
2. Clean the Gasket Channel:
   • Wipe down the channel where the gasket sits to remove any debris or residue. This ensures a clean surface for the new gasket.
3. Install the New Gasket:
   • Start at one corner of the door and press the new gasket into the channel.
   • Work your way around the door, pressing the gasket firmly into place.
   • Ensure the gasket is seated evenly and securely all the way around the door.
4. Check the Seal:
   • Close the door and latch it.
   • Check for any gaps or areas where the gasket is not making contact with the door frame. If necessary, adjust the gasket by pressing it more firmly into the channel.

Helpful Resources:

• Manual: Refer to the user manual for additional details and troubleshooting tips. Harvest Right User Manual

Ordering on the website is limited to 1. 

Contact us if you want more than 1.